Plastic Bicycle and motorbike Helmet Product

Payment Type: L/C,T/T
Incoterm: FOB,CFR,CIF,FCA
Min. Order: 1set Set/Sets
Delivery Time: 55 Days

Basic Info


Model No.: CT-10867

Shaping Mode: Injection Mould

Surface Finish Process: Polishing

Mould Cavity: Single Cavity

Plastic Material: ABS

Process Combination Type: Single-Process Mode

Application: Commodity, Home Use

Runner: Hot Runner

Design Software: UG

Installation: Fixed

Certification: TS16949, ISO

Standard: DME

Customized: Customized


Additional Info


Packaging: Wooden box

Productivity: 500000shots/mold life

Brand: Ceeto

Transportation: Ocean,Air

Place of Origin: China

Supply Ability: 30sets/month

Certificate: ISO

HS Code: 8480790090

Port: Ningbo,Shanghai


Product Description

Plastic Bicycle and motorbike Helmet Product outer surface is requesting smooth (high polishing), no burr and wear resistance, molding components on plastic bicycle helmet mould requests cavity block, core block, inserts, all ejector pins etc. Solid cavity block must be considered because there is no any split line coming out on outer surface of plastic bicycle helmet product. In this case, the advantage is that saving bench work assembly timing for inserted cavity. The same for core block design.


Plastic Bicycle and Motorbike Helmet Injection Mould Basic Information


  1. Mould cavity: Single cavity
  2. Mould plastic material: ABS is preferred ( can be PET, Transparent PC, PP as well )
  3. Runner: Hot runner ( Supplier can be YUDO, Synventive, Mold-master etc.)
  4. Mould cavity and core steel: 1.2738
  5. Mould base: LKM, DME, HASCO etc.
  6. Ejection system: Ejector block
  7. Leadtime: 55 days ( From mould design approval to the first shot )
  8. Moldlife: 500000shots- 1000000shots
  9. Packing for mould: Wooden box 


Plastic Bicycle Helmet Injectin Mould Parting Line


  1. The parting surface should be selected at the maximum cross section of the plastic part, otherwise, it will not be able to be demoulded and processed in the cavity
  2. It is helpful to ensure the precision of plastic parts
  3. To ensure the quality of appearance
  4. Consider to meet requirements of plastic parts
  5. Reduce the projection area of plastic parts when mould are closed during injection to reduce the required clamping force
  6. Better for venting
  7. Easy to machine for mould

Machining processing


From rough cutting to fine CNC milling, EDM manufacturing, Water line drilling, every step has been monitored and controlled by Ceeto Quality Department.


CNC milling for plastic bicycle helmet mould


CNC milling for making plastic bicycle helmet mould


workshop to make plastic bicycle helmet mould


Project Management


Project initiation meeting will be held once you place an order with us, together with Sales staff who is responsible for this program, Design Engineer, Program Manager, Production Manager, we are a team who will be in charge of all the program and Program Manager will be the window who is communicating with you all the technical issue even if during mould design stage, it would be easier for you to have good communication, Program Manager will report you via timing chart or weekly report about mould machining processing, mould assembly processing and so on.


Timing chart


Quality Control for Plastic Bicycle and motorbike Helmet Injection Mould


  1. Inspection to mould steel ( Mould steel hardness, surface defects etc.)
  2. Inspection to mould tolerance ( CMM machine must be used to check critical dimensions )
  3. Inspection to Plastic sample part ( Callipers and CMM machine are always considered to check full dimensions )
  4. Submit dimension reports to you and all "NG" dimensions will be checked again and make correction or improvement on moulds
  5. After step 4, we will make mould tryout or test once again to check all "NG" points
  6. Repeat steps above until all dimensions are within intolerance


CMM mould report for plastic helmet mould


CMM


Welcome you to send us your drawing for inquiry of Platic Bicycle and Motorbike Helmet and warmly welcome you to visit our plant, if you have any questions, please don't hesitate to let us know, we are very pleased to give you response at any time.




Contact Info

CONTACT US

Zhejiang Ceeto Molding Technology Co.,Ltd.

Address: No.78 BaiyunShan Road, Ningbo,China,Ningbo,Zhejiang

Contact Person: Jenny Wang

Phone:86-574-86863623

Fax:86-574-86863623

Full name Contact Phone Content
点击刷新验证码