Model No.: CT-10385
Packaging: Wooden box
Productivity: 500000shots/mold life
Place of Origin: China
Supply Ability: 30pcs/month
HS Code: 8480790090
Automobile horn accessory plastic material for PP this product is the electrode with horn mesh processing process of more than one mold cavity number of cavity. Polypropylene is a thermoplastic resin prepared by polymerization of propylene. According to the methyl arrangement position, there are three kinds of isotactic polypropylene (isotactic polypropylene), random polypropylene (atactic polypropylene) and syndiotactic polypropylene (syndiotactic polypropylene). Plastic material pp features: non-toxic, tasteless, small density, strength, stiffness, hardness and heat resistance are better than low-pressure polyethylene, can be used at about 100 ℃. It has good dielectric properties and high frequency insulation and is not affected by humidity, but it is brittle at low temperature, not wear-resistant and easy to aging. Suitable for making general mechanical parts, corrosion resistant parts and insulating parts. Common organic solvents, such as acids, alkalis, and so on, have little effect on it and can be used in food utensils.
Polypropylene has many excellent properties:
1, the relative density is only 0.89 and 0.91, which is one of the lightest varieties in plastics.
2, good mechanical properties, except impact resistance, other mechanical properties are better than polyethylene, molding processing properties are better.
3, has a high heat resistance, continuous use temperature up to 110 ℃ 120 ℃.
4, good chemical properties, almost no water absorption, and most chemicals do not react.
5, pure texture, non-toxic.
6, good electrical insulation.
7, The transparency of polypropylene products is better than that of high density polyethylene products.
Q1: What tolerances can you achieve for black automobile horn accessory plastic material?
There is not a given set of tolerances that fits all processes and materials. In every case, the final tolerances on your part will depend on a number of factors, including but not limited to:
We will review your design and provide a design for manufacturing review, pointing out any areas where we may not be able to achieve your desired tolerances. It`s helpful to us if you can specify which areas in your design have critical tolerances that must be met and which can be slightly modified if needed to reduce time and costs involved.
Q2: How do you ensure your nonferrous the lightest automobile horn accessory?
In order to deliver high-quality parts every time, we`ve instituted the following steps to ensure you get parts that meet and exceed your expectations.
Q3: Is the lead time in working days or calendar days?
Lead times are quoted in working days. As per our terms and conditions, quoted lead times commence only after completion and confirmation of design for manufacturing review and the beginning of actual production.
Q4: How long does a quotation take?
In most cases, we respond within a couple of days of receiving an RFQ. However, there may be situations when we must source material from an external supply and therefore the quotation may be delayed accordingly.
Q5: What is the difference between a multi-cavity mold and a family mold?
A multi-cavity mold has multiple cavities of the same part; a family mold produces a set. For instance, for an electronic enclosure, you may need a front, back, battery door, and a button. Those could all be molded at once in a family mold.
Q6: How long does it take to build an particular automobile horn accessory?
Depending on complexity and our tool room load, it normally need about 50 days to 60 days.
Q7: Can I modify the mold after the first run?
We can modify our steel molds by additional machining, fill-in welding, welding in additional material, or inserting a replacement feature, for a reasonable cost. If the changes are too great, however, producing a new mold may be more cost-effective than reworking the existing one.